|
Callout |
Component Name |
|---|---|
Preliminary Procedure
|
|
|
1 |
Fuel Rail |
|
2 |
Fuel Injector |
|
3 |
Fuel Injector Seal Ring |
|
4 |
Fuel Injector Retainer Clamp |
Fuel Tank Filler Pipe Replacement (Steel Tank)
Fuel Pump Flow Control Module ReplacementTires and Wheels Description and Operation
There are two types of tire and wheel balancing: static and dynamic.
Static balance is the equal distribution of weight around the wheel. Assemblies
that are statically unbalanced cause a bouncing action called wheel tramp. This
condition may eventually cause uneven tire wear.
...
Turbocharger Oil Return Pipe Replacement
Removal procedure
Remove the drivetrain and front suspension frame skid plate, if equipped.
Refer to Drivetrain and Front Suspension Frame Skid Plate Replacement.
Note: Simplified Graphic. DO NOT remove the warm up three
way catalytic converter.
...
Reverse (Gen 1)
When the gear selector lever is moved to the Reverse (R) position (from the Park
position) the normally-high 35R pressure control solenoid 2 is commanded ON and
the following changes occur in the transmission? hydraulic and electrical systems:
3-5-Reverse Clutch Applies
Manual Valv ...