|
Callout |
Component Name |
|---|---|
Preliminary Procedure
|
|
|
1 |
Fuel Pressure Sensor Caution: Refer to Fastener Caution.
19 Y(14 lb ft) |
Fuel Pressure Sensor Replacement - Fuel Feed PipeDrivetrain and Front Suspension Frame Replacement
Special Tools
EN-45059 Angle Meter
For equivalent regional tools, refer to Special Tools.
Removal Procedure
Support the radiator and condenser from above using the upper brackets
on each side.
Raise the vehicle on a hoist. Refer to Lifting and Jacking the Vehicle.
Re ...
Emblem/Nameplate Replacement
Caution: Refer to Exterior Trim Emblem Removal Caution.
The part and vehicle surface should be 21?°C (70?°F) prior to installation.
The vehicle should remain inside in a temperature range of 21?°C (70?°F) for
1 hour after assembly to allow the adhesive to develop sufficient bo ...
Readiness for Inspection/Maintenance (I/M) test
WARNING
A Nissan Armada equipped with Four-Wheel Drive (4WD) must never be tested
on a two-wheel dynamometer or similar equipment used in some emissions testing facilities.
Always inform inspection personnel that your Nissan Armada is a 4WD vehicle
before testing begins.
Using incorrect testi ...