Chevrolet Sonic manuals

Chevrolet Sonic Repair Manual: Fuel Tank Filler Door Latch Housing Replacement

Chevrolet Sonic Repair Manual / Body / Body Exterior / Panels / Fuel Tank Filler Door Latch Housing Replacement



Fuel Tank Filler Door Latch Housing Replacement

Callout

Component Name

Preliminary Procedures

  1. Remove the rear wheelhouse panel liner. Refer to Rear Wheelhouse Liner Replacement.
  2. Remove the fuel tank filler door. Refer to Fuel Tank Filler Door Replacement.

1

Fuel Tank Filler Door Latch Housing Retainer (Qty:?€‰4)

Procedure

Release the 4 filler door latch housing retainers on the back of the housing.

2

Fuel Tank Filler Door Latch Housing

Procedure

Press the fuel tank filler housing outward from the fuel filler pipe and the quarter panel.

Front Wheelhouse Liner Replacement (Rear)
!l Front Wheelhouse Liner Replacement Callout Component Name Preliminary Procedure Remove the tire and wheel assembly. Refer to ...

Fuel Tank Filler Door Replacement
Fuel Tank Filler Door Replacement Callout Component Name 1 Fuel Tank Filler Door Procedure Position the fuel tank ...

Other materials:

Roadside Assistance Program
For U.S.-purchased vehicles, call 1-800-243-8872; (Text Telephone (TTY): 1-888-889-2438). For Canadian-purchased vehicles, call 1-800-268-6800. Service is available 24 hours a day, 365 days a year. Calling for Assistance When calling Roadside Assistance, have the following information ready: ...

Fuel Pump Control Module Programming and Setup
The fuel pump control module must be programmed with the proper calibration software. The module stores and utilizes this information however if it is not properly configured with the correct calibration software, the fuel pump control module will not control all of the vehicle features proper ...

Bushing and Mating Shaft Inspection
Note: Proper bushing and corresponding mating shaft inspection should be performed before replacing the bushing, shaft, and in some cases, the component which houses the bushing. Thoroughly clean and dry the bushing and shaft surfaces before inspecting for damage. Any of the followin ...

© 2014-2026 Copyright www.csmans.com
 
0.0048