|
Callout |
Component Name |
|---|---|
Preliminary Procedures
|
|
|
1 |
Fuel Tank Filler Door Latch Housing Retainer (Qty:?€‰4) Procedure
Release the 4 filler door latch housing retainers on the back of the housing. |
|
2 |
Fuel Tank Filler Door Latch Housing Procedure
Press the fuel tank filler housing outward from the fuel filler pipe and the quarter panel. |
Remote Keyless Entry (RKE) System Operation
Instrument Panel Compartment Door Latch ReplacementEmblem/Nameplate Replacement
Caution: Refer to Exterior Trim Emblem Removal Caution.
The part and vehicle surface should be 21?°C (70?°F) prior to installation.
The vehicle should remain inside in a temperature range of 21?°C (70?°F) for
1 hour after assembly to allow the adhesive to develop sufficient bo ...
Floor Rear Air Outlet Duct Replacement - Left Side
Floor Rear Air Outlet Duct Replacement - Left Side
Callout
Component Name
Preliminary Procedure
Remove the floor panel carpet . Refer to Floor Panel Carpet Replacement.
1
Floor Rear Air Outlet Du ...
Air Intake System Description
Circuit/System Description
The primary function of the air intake system is to provide filtered air
to the engine. The system uses a filter element mounted in a housing. The filter
housing is remotely mounted and uses intake ducts to route the incoming air
into the throttle body. T ...