|
Callout |
Component Name |
|---|---|
|
1 |
Fuel Tank Filler Door Procedure
Position the fuel tank filler door to the full open position. Using light outward sliding pressure on the filler door, release the retainer on the fuel tank filler door from the hinge. |
Fuel Tank Filler Door Latch Housing Replacement
Hood AdjustmentEngine Oil Pressure Indicator Switch Replacement
Engine Oil Pressure Indicator Switch Replacement
Callout
Component Name
1
Engine Oil Pressure Indicator Switch
Caution: Refer to Component Fastener
Tightening Caution.
Procedure
Place coll ...
Air Conditioning Compressor and Condenser Hose Replacement (LUV)
Removal Procedure
Recover the refrigerant. Refer to Refrigerant Recovery and Recharging.
Remove the drivetrain and front suspension frame skid plate if equipped.
Refer to Drivetrain and Front Suspension Frame Skid Plate Replacement.
Remove the front fascia assembly. Re ...
Crankshaft and Bearing Cleaning and Inspection
Special Tools
EN-45059 Torque Angle Sensor Kit
GE-571-B Dial Gauge
For equivalent regional tools, refer to Special Tools.
Crankshaft End Play, Check
Note: Crankshaft attached with crankshaft bearing caps.
Install the GE-571-B gauge (1).
...