Callout |
Component Name |
---|---|
1 |
Fuel Tank Filler Door Procedure
Position the fuel tank filler door to the full open position. Using light outward sliding pressure on the filler door, release the retainer on the fuel tank filler door from the hinge. |
Brake Pedal Position Sensor Calibration
Calibration Criteria
Note: Do not apply the brake pedal during the brake pedal position
sensor calibration procedure. Any movement of the brake pedal during this
procedure will cause the calibration procedure to fail. If this occurs,
the brake pedal position sensor calibrati ...
Hood Primary Latch Release Cable Handle Replacement
Hood Primary Latch Release Cable Handle Replacement
Callout
Component Name
Preliminary Procedure
Remove the front side door opening floor carpet retainer. Refer to Front
Side Door Opening Floor Carpet Retainer Replacement. ...
Torque Converter Housing with Fluid Pump Assembly Installation (6T30)
Torque Converter Housing with Fluid Pump Assembly Installation
Callout
Component Name
1
Fluid Pump Seal Assembly
2
Torque Converter Housing Gasket
3
Torque Converte ...