Chevrolet Sonic Repair Manual: Fuel Tank Heat Shield Replacement
- Removal Procedure
-
- Support the fuel tank with a suitable jack.
- Remove the fuel tank strap fasteners (1) and lower the fuel tank straps (2).
- Remove the fuel tank heat shield fasteners (1) and remove the fuel tank heat shield (2).
- Installation Procedure
-
- Install the fuel tank heat shield (2) and tighten the fasteners (1)
to 10 Y (89 lb in)
.
- Install the fuel tank straps (2) and tighten the fasteners (1) to
22 Y (16 lb ft)
.
Caution:
Refer to Fastener Caution.
- Install the fuel tank heat shield (2) and tighten the fasteners (1)
to 10 Y (89 lb in)
Exhaust Rear Muffler Heat Shield Replacement
Exhaust Rear Muffler Heat Shield Replacement
Callout
Component Name
Preliminary Procedure
Disconnect the exhaust system hangers ...
Exhaust Manifold Cleaning and Inspection
Clean the exhaust manifold (1) in solvent.
Warning: Wear safety glasses in order to avoid eye damage.
Dry the exhaust manifold (1) with compressed air.
An exhaus ...
Other materials:
Overview (Radio with Touchscreen)
z VOL
y (Volume)
Press to decrease or increase the volume.
O (Power)
Press and hold to turn the power on or off.
D (Home Page)
Press to go to the Home Page. See Home Page.
...
Emblem/Nameplate Replacement
Caution: Refer to Exterior Trim Emblem Removal Caution.
The part and vehicle surface should be 21?°C (70?°F) prior to installation.
The vehicle should remain inside in a temperature range of 21?°C (70?°F) for
1 hour after assembly to allow the adhesive to develop sufficient bo ...
Heated Oxygen Sensor Replacement - Sensor 2
Heated Oxygen Sensor Replacement - Sensor 2
Callout
Component Name
1
Heated Oxygen Sensor 2
Warning: In order to avoid being burned, do not service the
exhaust system while it is still hot. Service the ...
0.0079