Chevrolet Sonic Repair Manual: General
- Adhesive Installation of Liftgate Windows
- Adhesive Installation of Rear Windows
- Adhesive Installation of Windshields
- Front Side Door Window Outer Sealing Strip Replacement
- Front Side Door Window Rear Guide Replacement
- Front Side Door Window Replacement
- Front Side Door Window Weatherstrip Replacement
- Full-Cut Method Description
- Liftgate Window Replacement
- Rear Side Door Stationary Window Replacement
- Rear Side Door Window Outer Sealing Strip Replacement (Hatchback)
- Rear Side Door Window Outer Sealing Strip Replacement (Sedan)
- Rear Side Door Window Rear Guide Replacement
- Rear Side Door Window Replacement (Hatchback)
- Rear Side Door Window Replacement (Sedan)
- Rear Side Door Window Weatherstrip Replacement (Hatchback)
- Rear Side Door Window Weatherstrip Replacement (Sedan)
- Rear Window Defogger Description and Operation
- Remote Keyless Entry (RKE) System Operation
- Special Tools
- Stationary Window Description
- Stationary Window Waterleak Repair
- Sunroof Window Height and Opening Fit Adjustment
- Sunroof Window Replacement
- Sunroof Window Seal Replacement
- Urethane Adhesive Description
Glass & Windows
...
Adhesive Installation of Liftgate Windows
Warning: Refer to Glass and Sheet Metal Handling Warning.
Use a urethane adhesive systems which meet GM Specification GM?€‰3651G.
Remove all mounds or loose pieces of urethane ad ...
Other materials:
Fog Lamps (RS)
To replace the front fog lamp bulb:
1. Locate the fog lamp located under the front fascia.
2. Remove the cap from the back of the fog lamp assembly.
3. Disconnect the electrical connector from the fog lamp bulb assembly.
4. Remove the bulb by turning it counterclockwise and pulling it straight ...
Crankshaft Front Oil Seal Replacement
Special Tools
EN-960 Installer
EN-45000 Remover Oil seal
For equivalent regional tools, refer to Special Tools.
Removal Procedure
Remove the crankshaft balancer. Refer to Crankshaft Balancer Replacement.
Place a drain pan underneath the front crankshaft seal area.
...
Synchronizers Assemble
1st/2nd Gear Synchronizer
iv
Note: When servicing the synchronizers, retain them in the
same order that they are removed. Keep the synchronizer components together
and mark them to identify correct location.
Install the synchronizer inserts (1) into ...
0.0053