Chevrolet Sonic Repair Manual: General
- Air Conditioning Compressor Bracket Installation
- Air Conditioning Compressor Bracket Removal
- Automatic Transmission Flex Plate Installation
- Automatic Transmission Flex Plate Removal
- Automatic Transmission Flex Plate Replacement
- Battery Charging
- Battery Current Sensor Replacement
- Battery Description and Operation
- Battery Inspection/Test
- Battery Negative Cable Disconnection and Connection
- Battery Negative Cable Replacement
- Battery Positive Cable Replacement
- Battery Positive and Negative Cable Replacement
- Battery Replacement
- Battery Tray Replacement
- Charging System Description and Operation
- Cleanliness and Care
- Drive Range, First Gear Engine Braking (Gen 1)
- Drive Range, First Gear Engine Braking (Gen 2)
- Electrical Power Management Description and Operation
- Engine Component Description
- Engine Cover Replacement
- Engine Flywheel Installation
- Engine Flywheel Removal
- Engine Flywheel Replacement
- Engine Identification
- Engine Replacement
- Engine Replacement (Automatic Transmission)
- Engine Replacement (Manual Transmission)
- Generator Installation
- Generator Removal
- Generator Replacement (LUV)
- Generator Replacement (LUW)
- Lubrication Description
- Neutral - Engine Running (Gen 1)
- Neutral - Engine Running (Gen 2)
- Park - Engine Running (Gen 1)
- Park - Engine Running (Gen 2)
- Replacing Engine Gaskets
- Separating Parts
- Service Prior to Assembly
- Special Tools
- Throttle Body Assembly Installation
- Throttle Body Assembly Removal
- Throttle Body Installation
- Throttle Body Removal
- Tools and Equipment
- Transmission Replacement (With 1.2L or 1.4L Engine)
- Transmission Replacement (With 1.6L or 1.8L Engine)
- Use of Room Temperature Vulcanizing (RTV) and Anaerobic Sealant
- Valve Lifter Installation
- Valve Lifter Removal
- Valve Lifter Replacement
- Vehicle, Engine and Transmission ID and VIN Location, Derivative and Usage
Engine
...
Air Conditioning Compressor Bracket Installation
Install the air conditioning compressor bracket (2).
Caution: Refer to Fastener Caution.
Install the 3 air conditioning compressor bracket bolts (1) and tigh ...
Other materials:
Rear Spring, Insulator, and Jounce Bumper Replacement
Rear Spring, Insulator, and Jounce Bumper Replacement
Callout
Component Name
Preliminary Procedure
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
1
Rear Spring
Proced ...
Shock Absorber Disposal
Warning: Use the proper eye protection when drilling to prevent metal
chips from causing physical injury.
Clamp the strut in a vise horizontally with the rod (1) completely extended.
Drill a hole in the strut at the center of the end cap (3) using a 5 mm
...
Electronic Brake Control Module Programming and Setup
Note:
DO NOT program a control module unless directed to by a service procedure
or a service bulletin. If the ECU is not properly configured with the correct
calibration software, the ECU will not control all of the vehicle features
properly.
Ensure the programming tool is ...
0.0057