Callout |
Component Name |
---|---|
Preliminary Procedure
Remove the generator. Refer to Generator Replacement. |
|
1 |
Generator Pulley Nut Cap |
2 |
Generator Pulley Nut Caution: Refer to Fastener Caution. Procedure
Remove the generator pulley nut by using EN-6372 counterhold . Tighten
90 Y (66 lb ft) Special Tools
EN-6372 Counterhold For equivalent regional tools, refer to Special Tools. |
3 |
Generator Pulley |
4 |
Generator |
Lap-Shoulder Belt
All seating positions in the vehicle have a lap-shoulder belt.
The following instructions explain how to wear a lap-shoulder belt properly.
1. Adjust the seat, if the seat is adjustable, so you can sit up straight. To
see how, see “Seats” in the Index.
2. Pick up the latch plate and pull ...
What to Add
Use only new DOT 3 brake fluid from a sealed container. See Recommended Fluids
and Lubricants.
Always clean the brake/clutch fluid reservoir cap and the area around the cap
before removing it. This helps keep dirt from entering the reservoir.
Warning
With the wrong kind of fluid in the brake/ ...
Rear Door Lock Cylinder Replacement
Rear Door Lock Cylinder Replacement
Callout
Component Name
1
Rear Side Door Lock Cylinder Opening Cover Screw Access Plug
Tip: Use a flat-bladed tool to remove the cover.
2
Rear ...