Chevrolet Sonic Repair Manual: Generator Replacement (LUV)

Chevrolet Sonic Repair Manual / Electrical / Charging / Generator Replacement (LUV)

Removal Procedure

Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
Remove the drive belt. Refer to Drive Belt Replacement.
Remove the drive belt tensioner. Refer to Drive Belt Tensioner Replacement.

Remove the engine harness connector (1) and the battery positive cable generator fastener (2).
Remove the battery positive cable (3) from the back of the generator.

Remove the generator mounting fasteners (1) and remove the generator (2) from the engine.

Installation Procedure

Caution:

Refer to Fastener Caution.

Install the generator (2) with the mounting fasteners (1) and tighten to 35 Y (26 lb ft)
.

Install the battery positive cable (3) and the engine harness connector (1) to the back of the generator. Tighten fastener (2) to 9 Y (80 lb in)
.
Install the drive belt tensioner. Refer to Drive Belt Tensioner Replacement.
Install the drive belt. Refer to Drive Belt Replacement.
Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.

Generator Removal

Remove the 2 generator bolts (2). Remove the generator (1). ...

Generator Replacement (LUW)

Removal Procedure Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection. Raise and support the vehicle. Refer to Lifting and Jacking ...

Other materials:

Front Air Deflector Replacement
Front Air Deflector Replacement Callout Component Name Preliminary Procedure Remove front bumper fascia. Refer to Front Bumper Fascia Replacement Remove the headlamp. Refer to Headlamp Replacement. 1 ...

Evaporative Emission Canister Purge Solenoid Valve Replacement
Evaporative Emission Canister Purge Solenoid Valve Replacement Callout Component Name 1 Purge Pipe Fittings (Qty: 2) Procedure Disconnect the vacuum lines quick connect fitting from the evaporative emission ca ...

Turbocharger Oil Feed Pipe Replacement
Removal Procedure Open the hood. Disconnect battery negative cable. Refer to Battery Negative Cable Disconnection and Connection. Remove the exhaust manifold heat shield. Refer to Exhaust Manifold Heat Shield Replacement. Remove the turbocharger oil feed p ...

0.0104