Chevrolet Sonic manuals

Chevrolet Sonic Owner's Manual: GM Mobility Reimbursement Program

This program is available to qualified applicants for cost reimbursement of eligible


This program is available to qualified applicants for cost reimbursement of eligible aftermarket adaptive equipment required for the vehicle, such as hand controls or a wheelchair/ scooter lift for the vehicle.

For more information on the limited offer, visit www.gmmobility.com or call the GM Mobility Assistance Center at 1-800-323-9935. Text Telephone (TTY) users, call 1-800-833-9935.

General Motors of Canada also has a Mobility Program. Visit www.gm.ca or call 1-800-GM-DRIVE (463-7483) for details. TTY users call 1-800-263-3830.

Online Owner Center
Online Owner Experience (U.S.) my.chevrolet.com The Chevrolet online owner experience is a one-stop resource that allows interaction with Chevrolet and keeps important vehicle-specific information ...

Roadside Assistance Program
For U.S.-purchased vehicles, call 1-800-243-8872; (Text Telephone (TTY): 1-888-889-2438). For Canadian-purchased vehicles, call 1-800-268-6800. Service is available 24 hours a day, 365 days a year. ...

Other materials:

If No Steam Is Coming from the Engine Compartment
If an engine overheat warning is displayed but no steam can be seen or heard, the problem may not be too serious. Sometimes the engine can get a little too hot when the vehicle: Climbs a long hill on a hot day. Stops after high-speed driving. Idles for long periods in traffic. If the ...

Front Floor Console Extension Replacement - Right Side
Front Floor Console Extension Replacement - Right Side Callout Component Name 1 Front Floor Console Extension Procedure Use a flat bladed plastic trim tool in order to release the retainers securing the extens ...

Camshaft Position Actuator Adjuster Removal
Special Tools EN-6340 Camshaft Adjuster Locking Tool EN-6628-A Camshaft Locking Tool For equivalent regional tools, refer to Special Tools. Note: The right half of the EN-6340 locking tool can be recognized by the lettering "right", arrow, on the tool. Pre ...

В© 2014-2026 Copyright www.csmans.com
 
0.005