|
Callout |
Component Name |
|---|---|
|
1 |
Heated Oxygen Sensor 2 Warning: In order to avoid being burned, do not service the exhaust system while it is still hot. Service the system when it is cool. Caution: Refer to Fastener Caution.
42 Y (31 lb ft) Special Tools
EN-6179 Heated Oxygen Sensor Remover / Installer For equivalent regional tools. refer to Special Tools. |
Heated Oxygen Sensor Replacement - Sensor 1
Heated Oxygen Sensor Resistance Learn Reset CautionHood Rear Seal Replacement
Hood Rear Seal Replacement
Callout
Component Name
1
Hood Rear Seal
Procedure
Clean the area where the seal will be mounted. Use a suitable solvent
with a mixture of 50?€‰percent isopropyl alcohol and 50?â ...
Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and
Connection
Removal Procedure
Note: Perform the following procedure when removing the retaining
rings and cooler lines from the quick connect fittings located on the
radiator and/or the transmission.
Pull the plastic cap back from the quick connect fitting
and dow ...
Seat belt extenders
If, due to body size or seating position, the standard lap-shoulder belt in the
Nissan Armada cannot be comfortably or properly fastened, a compatible seat belt
extender is available. This accessory is specifically designed to work with the
original seat belt system installed in the Nissan Arm ...