Chevrolet Sonic manuals

Chevrolet Sonic Repair Manual: Heater and Air Conditioning Evaporator and Blower Module Removal and Installation

Chevrolet Sonic Repair Manual / HVAC / Blower Motor / Heater and Air Conditioning Evaporator and Blower Module Removal and Installation



Heater and Air Conditioning Evaporator and Blower Module Removal and Installation

Callout

Component Name

Preliminary Procedures

  1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging.
  2. Drain the cooling system. Refer to Cooling System Draining and Filling.
  3. Remove the instrument panel tie bar. Refer to Instrument Panel Tie Bar Replacement.
  4. Disconnect the HVAC module electrical connectors.
  5. Remove the air conditioning evaporator hose assembly from the thermal expansion valve. Refer to Air Conditioning Evaporator Hose Assembly Replacement.
  6. Remove the heater outlet hose if equipped. Refer to Heater Outlet Hose Replacement.
  7. Remove the heater inlet hose if equipped. Refer to Heater Inlet Hose Replacement.

1

Heater and Air Conditioning Evaporator and Blower Module Fastener

Caution:

Refer to Fastener Caution.

Tighten


22 Y (16 lb ft)

2

Heater and Air Conditioning Evaporator and Blower Module Assembly

Blower Motor Replacement
Removal Procedure — Production Blower Motor Remove the passenger side instrument panel insulator. Refer to Instrument Panel Insulator Replacement. Remove the passenger side infl ...

Blower Motor Resistor Replacement
Blower Motor Resistor Replacement Callout Component Name Preliminary Procedure Remove the instrument panel insulator, if equipp ...

Other materials:

Front Wheelhouse Liner Inner Front Extension Replacement (Right Side, LUV)
Front Wheelhouse Liner Inner Front Extension Replacement Callout Component Name Preliminary Procedure Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation. Remove the front fascia opening l ...

Instrument Cluster Upper Bezel Replacement
Instrument Cluster Upper Bezel Replacement Callout Component Name 1 Instrument Panel Cluster Upper Bezel Procedures Use a flat bladed plastic trim tool in order to disengage the retainers securing the instrume ...

Fuel Pump Flow Control Module Replacement
Fuel Pump Flow Control Module Replacement Callout Component Name Preliminary Procedures Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection. Remove the right rear compart ...

© 2014-2022 Copyright www.csmans.com
 
0.0062