Callout |
Component Name |
---|---|
Preliminary Procedures
|
|
1 |
Heater Core Tube Cover Bolt (Qty: 2) Caution: Refer to Fastener Caution. |
2 |
Heater Core Tube Cover |
3 |
Heater Core Tube Clamp (Qty: 2) |
4 |
Heater Core Tube Rear Cover Bolt |
5 |
Heater Core Tube Rear Cover |
6 |
Heater Core Tube Note: Heater Core tubes are serviced as a kit . |
Fog Lamps (RS)
To replace the front fog lamp bulb:
1. Locate the fog lamp located under the front fascia.
2. Remove the cap from the back of the fog lamp assembly.
3. Disconnect the electrical connector from the fog lamp bulb assembly.
4. Remove the bulb by turning it counterclockwise and pulling it straight ...
Rear Wheel Speed Sensor Replacement
Removal Procedure
Warning: Refer to Brake Dust Warning.
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
Remove the tire and wheel assembly. Refer to Tire and Wheel Removal
and Installation.
Remove the rear wheel speed sensor ...
Manual Transmission Shift Lever and Selector Lever Cable Adjustment
Remove the floor console. Refer to
Front Floor Console Replacement.
Lift upward and disengage (do not remove) both cable lock
adjusters (1) to release the internal cable assembly, one for each side.
Block the shift control housing, push the selector lever ( ...