|
Callout |
Component Name |
|---|---|
Preliminary Procedures
|
|
|
1 |
Heater Core Tube Cover Bolt (Qty: 2) Caution: Refer to Fastener Caution. |
|
2 |
Heater Core Tube Cover |
|
3 |
Heater Core Tube Clamp (Qty: 2) |
|
4 |
Heater Core Tube Rear Cover Bolt |
|
5 |
Heater Core Tube Rear Cover |
|
6 |
Heater Core Tube Note: Heater Core tubes are serviced as a kit . |
Heater Core Inlet Tube Replacement
Heater Core ReplacementLiftgate Weatherstrip Replacement
Liftgate Weatherstrip Replacement
Callout
Component Name
1
Liftgate Weatherstrip
Procedure
Clean the area where the seal will be mounted. Use a suitable solvent
with a mixture of 50?€‰percent isopropyl alc ...
Brake Rotor Thickness Variation Measurement
Warning: Refer to Brake Dust Warning.
Note: Any disc brake rotor that exhibits thickness variation exceeding
the maximum acceptable level must be refinished or replaced. Thickness variation
exceeding the maximum acceptable level can cause brake pulsation.
If the inboard fricti ...
Automatic Transmission Flex Plate Removal
Special Tools
EN-652 Automatic Transmission Flex Plate Holder
For equivalent regional tools, refer to Special Tools.
Install the EN-652 holder (1) to hold the automatic
transmission flex plate (2).
Loosen the 6 automatic transmission flex plate bolts.
Re ...