|
Callout |
Component Name |
|---|---|
Preliminary Procedures
|
|
|
1 |
Lower Heater Case Fasteners (Qty: 9) Caution: Refer to Fastener Caution. |
|
2 |
Heater Tube Cover |
|
3 |
Lower Heater Core Case |
|
4 |
Heater Core Procedure
Pull out the heater core. |
Heater Core Outlet Tube Replacement
Heater Inlet Hose Replacement (LDE, LUW)Instrument Panel Outer Trim Cover Replacement
Instrument Panel Outer Trim Cover Replacement
Callout
Component Name
1
Instrument Panel Outer Trim Cover (Qty:?€‰2)
Procedures
Use a flat bladed plastic trim tool in order to disengage the retainers
securi ...
Cylinder Head Installation
Special Tools
EN-45059 Torque Angle Sensor Kit
For equivalent regional tools, refer to Special Tools.
Clean the sealing surfaces.
Inspect for plane surface.
Cylinder block, cylinder head
Straight-edge, feeler gauge
Install the cylinder head gasket.
Install the cylinder head. ...
Control Valve Body Cover Replacement
Removal Procedure
Disconnect the battery negative cable. Refer to
Battery Negative Cable Disconnection and Connection.
Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle.
Remove the front bumper fascia opening lower cover.
Refer to Front Bumper ...