Chevrolet Sonic manuals

Chevrolet Sonic Repair Manual: Heater Outlet Hose Replacement (LDE, LUW)

Chevrolet Sonic Repair Manual / HVAC / Ventilation Doors & Ducts / Heater Outlet Hose Replacement (LDE, LUW)

Special Tools

BO-38185 Hose Clamp Pliers

For equivalent regional tools, refer to Special Tools.

Removal Procedure
  1. Drain the cooling system. Refer to Cooling System Draining and Filling.


  2. Disengage the heater outlet hose quick connect clip (1) at the heater core.
  3. Remove the heater outlet hose (2) from the heater core.

  4. Remove the heater outlet hose clamp (1) at the engine using BO-38185 Hose Clamp Pliers .
  5. Remove the heater outlet hose (2) from the engine.
  6. Remove the heater outlet hose from the vehicle.
Installation Procedure

    Install the heater outlet hose to the vehicle.
  1. Install the heater outlet hose to the vehicle.
  2. Install the heater outlet hose (2) to the engine.
  3. Install the heater outlet hose clamp (1) at the engine using BO-38185 Hose Clamp Pliers .


  4. Note:

    The quick connector has an internal anti-rotation feature. The ensure the quick connector is properly aligned to the heater core pipe, position the white mark to the 12:00 O’clock position during installation.

  5. Install the heater outlet hose (2) to the heater core.
  6. Engage the heater outlet hose quick connect clip (1) at the heater core.
  7. Fill the cooling system. Refer to Cooling System Draining and Filling.
Mode Control Cable Replacement (LHD)
Mode Control Cable Replacement Callout Component Name Preliminary Procedures Remove the heater and air conditioning control.Refer t ...

Heater Outlet Hose Replacement (LUV)
Heater Outlet Hose Replacement Callout Component Name Preliminary Procedures Drain the engine coolant. Refer to Cooling System Drai ...

Other materials:

Seat Adjustment
Manual Seats Warning: You can lose control of the vehicle if you try to adjust a driver seat while the vehicle is moving. Adjust the driver seat only when the vehicle is not moving. To adjust a manual seat: Pull the handle at the front of the seat. Slide the ...

Wheel Alignment Measurement
Steering and vibration complaints are not always the result of improper alignment. One possible cause is wheel and tire imbalance. Another possibility is tire lead due to worn or improperly manufactured tires. Lead/pull is defined as follows: At a constant highway speed on a typical straight r ...

Engine Flywheel Removal
Special Tools EN-652 Flywheel Holder For equivalent regional tools, refer to Special Tools. Install EN-652 holder  (1) to hold the engine flywheel (2). Remove and DISCARD the 6 engine flywheel bolts (2). Remove the engine flywheel (1). ...

© 2014-2022 Copyright www.csmans.com
   
0.0076