|
Callout |
Component Name |
|---|---|
Preliminary Procedures
|
|
|
1 |
Heater Outlet Hose Clamp (Qty: 2) Special Tools
BO-38185 Hose Clamp Pliers For equivalent regional tools, refer to Special Tools. |
|
2 |
Heater Outlet Hose Retainer |
|
3 |
Heater Outlet Hose |
Heater Outlet Hose Replacement (LDE, LUW)
Heating and Air Conditioning System Description and OperationTire and Wheel Assembly Runout Measurement - Off Vehicle
Raise and support the vehicle.
Mark the location of the wheels to the wheel studs and mark the specific
vehicle position on each tire and wheel – LF, LR, RF, RR.
Remove the tire and wheel assemblies from the vehicle.
Closely inspect each tire for proper and even bead seating.
If an ...
Air Conditioning Compressor and Condenser Hose Replacement (LUW)
Removal Procedure
Recover the refrigerant. Refer to Refrigerant Recovery and Recharging.
Disconnect the A/C refrigerant pressure sensor electrical connector.
Remove air conditioning compressor and condenser hose nut (1).
Remove air conditioning compressor ...
Electrical Power Management Description and Operation
Electrical Power Management
The electrical power management is used to monitor and control the charging
system and alert the driver of possible problems within the charging system.
The electrical power management system makes the most efficient use of the generator
output, improves ...