Chevrolet Sonic Repair Manual: Hood Hinge Replacement
|
Callout |
Component Name |
|---|---|
Preliminary Procedures
|
|
|
1 |
Hood Hinge Bolt (Qty:?€‰2) Caution: Refer to Fastener Caution.
22?€‰Y (16?€‰lb?€‰ft) |
|
2 |
Hood Hinge Procedure
Adjust the hood and hinge if needed. Refer to Hood Adjustment. |
Hood Ajar Indicator Description and Operation
Hood Ajar Switch
The body control module (BCM) applies B+ to the hood ajar signal circuit
and monitors the voltage to determine the position of the hood. When the hood
is closed, the sw ...
Hood Hold-Open Rod Replacement
Hood Hold-Open Rod Replacement
Callout
Component Name
1
Hood Hold-Open Rod
Warning: When a hood hold open device ...
Other materials:
Radiator Inlet Hose Replacement (LDE LUW)
Special Tools
BO-38185 Hose Clamp Pliers
For equivalent regional tools, Refer to Special Tools.
Removal Procedure
Drain the cooling system. Refer to Cooling System Draining and Filling.
Remove the radiator inlet hose clamp (1) at the engine using BO-38185 ...
Evaporative Emission System Hose/Pipe Replacement
Special Tools
CH-807 Closure Plugs
CH-6015 Closure Plugs
For equivalent regional tools, refer to Special Tools.
Removal Procedure
Warning: Refer to Gasoline/Gasoline Vapors Warning.
Disconnect the battery negative cable. Refer to Battery Negative Cable
Disconnec ...
Exhaust Manifold Cleaning and Inspection
Clean the exhaust manifold (1) in solvent.
Warning: Wear safety glasses in order to avoid eye damage.
Dry the exhaust manifold (1) with compressed air.
An exhaust manifold leak or damage may cause an exhaust leak and may effect
OBD II system perf ...
0.0068