|
Callout |
Component Name |
|---|---|
Preliminary Procedures
|
|
|
1 |
Hood Hinge Bolt (Qty:?€‰2) Caution: Refer to Fastener Caution.
22?€‰Y (16?€‰lb?€‰ft) |
|
2 |
Hood Hinge Procedure
Adjust the hood and hinge if needed. Refer to Hood Adjustment. |
Hood Side Seal Replacement
Hood Insulator ReplacementParking Brake Lever Replacement
Removal Procedure
Remove the front floor console. Refer to Front Floor Console Replacement.
Ensure that the park brake lever is in the fully released position.
Disconnect the electrical connector from the park brake warning lamp
switch.
Using ONLY HAND TOOL ...
Engine Oil and Oil Filter Replacement
Removal Procedure
Open hood.
Place a drain pan below the vehicle.
Caution: To prevent damage to oil filter cap ensure proper
tool is used. Do not use an open end wrench which may cause damage to
filter cap.
Using a 24mm socket or closed end wrench loosen ...
Transmission Control Replacement
Removal Procedure
Remove the floor console. Refer to
Front Floor Console Replacement.
Lift both cable adjustment retainers (1), one for
each cable, to release the shift lever and selector lever cable.
.1
Pull the shift lever and selector lever cable ret ...