|
Callout |
Component Name |
|---|---|
|
Preliminary Procedure
Remove the front side door opening floor carpet retainer. Refer to Front Side Door Opening Floor Carpet Retainer Replacement. |
|
|
1 |
Hood Primary Latch Release Cable Handle Procedure
Press the release cable handle upward to release the retainers from the instrument panel bracket. |
|
2 |
Hood Primary Latch Release Cable Procedure
Disconnect the hood release cable from the hood release handle. |
Hood Hold-Open Rod Replacement
Hood Primary Latch Release Cable ReplacementBrakes
If the overheat warning no longer displays, the vehicle can be driven. Continue
to drive the vehicle slowly for about 10 minutes. Keep a safe vehicle distance from
the vehicle in front. If the warning does not come back on, continue to drive normally
and have the cooling system checked for pro ...
OnStar Description and Operation
This OnStar® system consists of the following components:
Telematics communication interface control module
OnStar® three button assembly
Microphone
Cellular antenna
Navigation antenna
Bluetooth® antenna (If equipped)
Back up battery (If equipped)
This system also interfaces wi ...
Crankshaft Balancer Installation
Special Tools
EN-470–B Angular Torque Wrench
EN-956?E Extension
EN-49979 Crankshaft Shock Mount Retainer
For equivalent regional tools, refer to Special Tools.
Note: The crankshaft balancer flange must fit to the hexagon of
the oil pump rotor (2) and to the two ...