Chevrolet Sonic manuals

Chevrolet Sonic Owner's Manual: If Steam Is Coming from the Engine Compartment

Chevrolet Sonic Owner's Manual / Vehicle Care / Vehicle Checks / Engine Overheating / If Steam Is Coming from the Engine Compartment

Warning

Steam from an overheated engine can burn you badly, even if you just open the hood. Stay away from the engine if you see or hear steam coming from it. Just turn it off and get everyone away from the vehicle until it cools down. Wait until there is no sign of steam or coolant before you open the hood.

If you keep driving when the engine is overheated, the liquids in it can catch fire. You or others could be badly burned. Stop the engine if it overheats, and get out of the vehicle until the engine is cool.

Engine Overheating
The vehicle has an indicator to warn of the engine overheating. If the decision is made not to lift the hood when this warning appears, get service help right away. See Roadside Assistance Program. ...

If No Steam Is Coming from the Engine Compartment
If an engine overheat warning is displayed but no steam can be seen or heard, the problem may not be too serious. Sometimes the engine can get a little too hot when the vehicle: Climbs a long ...

Other materials:

Home Page (Radio with Touchscreen)
Touchscreen Buttons Touchscreen buttons show on the screen when available. When a function is unavailable, the button may gray out. When a function is selected, the button may highlight. Home Page Features audiopicturemovietelephoneelsmartphonelinksettings03/06/2012 ...

Instrument Panel Tie Bar Replacement
Removal Procedure Remove the Instrument panel assembly. Refer to Instrument Panel Assembly Replacement. Remove the steering column and wheel from the vehicle. Refer to Steering Column Replacement. Remove the air inlet grill panel. Refer to Air Inlet Grille Panel Replacem ...

Tire and Wheel Assembly-to-Hub/Axle Flange Match-Mounting
Note: After remounting a tire and wheel assembly to a hub/axle flange, remeasure the tire and wheel assembly on-vehicle runout in order to verify that the amount of runout has been reduced and brought to within tolerances. Mark the location of the high spot on the tire and wheel asse ...

В© 2014-2026 Copyright www.csmans.com
 
0.0074