Chevrolet Sonic Repair Manual: Ignition System
- Electronic Ignition System Description
- Ignition Transmission Lock Check
- Ignition and Start Switch Housing Replacement
- Ignition and Start Switch Replacement
- Lock Cylinder Coding - Ignition
- Ignition Coil Installation
- Ignition Coil Removal
- Ignition Coil Replacement
- Spark Plug Inspection
- Spark Plug Replacement
Fuel Tank Replacement
Removal Procedure
Disconnect the battery negative cable. Refer to Battery Negative Cable
Disconnection and Connection.
Relieve the fuel pressure. Refer to Fuel Pressure Relief.
...
Electronic Ignition System Description
Electronic Ignition System Operation
The electronic ignition system produces and controls the high energy secondary
spark. This spark ignites the compressed air/fuel mixture at precisely t ...
Other materials:
Setting the Time and Date
1. Press , and then press settings.
2. Press time and date settings, and then set time and date. 3. Press
or
to adjust the value. 4. Press
.
...
Vehicle Yaw Sensor Learn
The yaw sensor does not require calibration often. Calibration of the yaw rate
sensor might be required after certain service procedures are performed. Some of
these procedures are as follows:
Electronic brake control module (EBCM) replacement
Multi-axis acceleration sensor replacement
...
Exhaust Camshaft Removal
Remove the camshaft bearing cap bolts in a spiral sequence as shown one
turn at a time until there is no spring tension pushing on the camshaft.
Note: Mind the markings on the camshaft bearing caps to ensure
they will be installed in the same position.
Remove the ...
0.0065