Callout |
Component Name |
---|---|
1 |
A/Trans Output Speed Sensor Bolt M6 x 18 (Qty: 1) |
2 |
A/Trans Output Speed Sensor Assembly |
3 |
Input Speed Sensor Bolt M6 x 23 (Qty: 1) |
4 |
Input Speed Sensor Assembly Note: Compress the locking tabs on the plug to release it from the case and to avoid damaging the retainers. |
5 |
Input Speed Sensor Assembly Seals (Qty: 3) Note: Discard the seals. They are not reusable. |
Audio Disc Player and USB Receptacle Replacement
Audio Disc Player and USB Receptacle Replacement
Callout
Component Name
1
Audio Disc Player and USB Receptacle
Procedure
Open the instrument panel compartment door and
using a small flat bladed tool, release ...
Front Disc Brake Pads Replacement
Removal Procedure
Warning: Refer to Brake Dust Warning.
Note: Always replace disc brake pads in axle sets.
Inspect the fluid level in the brake master cylinder reservoir.
If the brake fluid level is midway between the maximum-full point and
the minimum allowab ...
Manual Transmission Shift Lever and Selector Lever Cable Adjustment
Remove the floor console. Refer to
Front Floor Console Replacement.
Lift upward and disengage (do not remove) both cable lock
adjusters (1) to release the internal cable assembly, one for each side.
Block the shift control housing, push the selector lever ( ...