|
Callout |
Component Name |
|---|---|
|
1 |
A/Trans Output Speed Sensor Bolt M6 x 18 (Qty: 1) |
|
2 |
A/Trans Output Speed Sensor Assembly |
|
3 |
Input Speed Sensor Bolt M6 x 23 (Qty: 1) |
|
4 |
Input Speed Sensor Assembly Note: Compress the locking tabs on the plug to release it from the case and to avoid damaging the retainers. |
|
5 |
Input Speed Sensor Assembly Seals (Qty: 3) Note: Discard the seals. They are not reusable. |
Input and Output Speed Sensor Installation
Input, Reaction, and Output Carrier Assemble (Gen 1)Parking Brake Cable Replacement (Drum Brake)
Removal Procedure
Remove the front floor console. Refer to Front Floor Console Replacement.
Ensure that the parking brake lever is in the fully released position.
Using ONLY HAND TOOLS, remove the adjusting nut (1) from the end of
the front park bra ...
Brake Pedal Travel Measurement and Inspection
Special Tools
CH-28662 Brake Pedal Effort Gauge
For equivalent regional tools, refer to Special Tools.
With the ignition OFF and the brakes cool, apply the brakes 3–5 times, or
until the brake pedal becomes firm, in order to deplete the brake booster power
reserve.
In ...
Air Conditioning Compressor Bracket Installation
Install the air conditioning compressor bracket (2).
Caution: Refer to Fastener Caution.
Install the 3 air conditioning compressor bracket bolts (1) and tighten
to 22 Y (16 lb ft).
...