Chevrolet Sonic Repair Manual: Input, Reaction, and Output Carrier Assemble (Gen 2)

Chevrolet Sonic Repair Manual / Powertrain / Transmission/Transaxle / Automatic / General / Input, Reaction, and Output Carrier Assemble (Gen 2)

Input, Reaction, and Output Carrier Assemble
Callout	Component Name
1	3? Reverse and 4?? Clutch Housing Assembly
2	Reaction Carrier Sun Gear Thrust Bearing
3	Reaction Carrier Sun Gear Assembly
4	Reaction Carrier Assembly Note: Starting in 2012, all 6T30/40/45/50 models have 3 pinion reaction carriers. The 3 pinion reaction carriers are back serviceable for all models. Original Configuration: The 6T30 and 6T40 had 3 pinions. The 6T45 and 6T50 had 4 pinions.
5	Input Carrier Thrust Bearing Assembly
6	Input Sun Gear Thrust Bearing Assembly
7	Input Carrier Assembly Note: The 6T30 and 6T40 have 4 pinions. The 6T45 and 6T50 have 5 pinions.
8	Input Sun Gear
9	Input Sun Gear Thrust Bearing Assembly
10	Output Carrier Thrust Bearing Assembly
11	Output Carrier Assembly Note: The 6T30 and 6T40 have 4 pinions. The 6T45 and 6T50 have 5 pinions.
12	2? Clutch Plate Assembly (Qty: 2) - Model Dependent Note: Begin with the clutch plate assembly and alternate with the clutch plate. The number of grooves in the clutch plate friction material varies depending on model.
13	2? Clutch Plate (Qty: 1) Note: Only install one 2? Clutch Plate at this time. The remaining clutch plate is installed into the case.

Input, Reaction, and Output Carrier Assemble (Gen 1)

Input, Reaction, and Output Carrier Assemble Callout Component Name 1 3? Reverse and 4?? Clutch Housing Assembly ...

Input, Reaction, and Output Carrier Disassemble

Input, Reaction, and Output Carrier Disassemble Callout Component Name 1 Output Carrier Assembly Note: ...

Other materials:

Front Brake Caliper Bracket Replacement
Removal Procedure Warning: Refer to Brake Dust Warning. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation. Note: DO NOT use any ai ...

Oil Pressure Relief Valve Replacement
Removal Procedure Remove the oil pan. Refer to Oil Pan Replacement. Remove the oil pressure relief valve closure bolt (1). Remove the oil pressure relief valve assembly (2). Separate the piston (3) and the spring (4). Warning: Bod ...

Engine Replacement (Manual Transmission)
Special Tools J-45859 Wheel Drive Shaft Remover . CH-807 Closure Plugs . For equivalent regional tools, refer to Special Tools. Removal Procedure Remove the battery and battery tray. Refer to Battery Tray Replacement. Relieve the fuel system pressure. Refer to ...

0.007