Chevrolet Sonic Repair Manual: Input Shaft Assemble
Special Tools
J-840733 Driver
For equivalent regional tools, refer to Special Tools.
- Place the input shaft rear bearing retaining ring (2) on the input shaft.
- Install the input shaft rear bearing assembly (1) using the J-840733 driver and a hydraulic press.
Note:
Ensure the input shaft rear bearing retaining ring (2) is placed on the input shaft before installing the input shaft rear bearing assembly (1).
Gears Cleaning and Inspection (Gen 2)
Gears
Warning: Wear safety glasses to avoid injury when using compressed
air or any cleaning solvent. Bodily injury may occur if fumes are inhaled
or if skin is exp ...
Input Shaft Disassemble
Note: The input shaft rear bearing retaining ring (2) remains
loose on the shaft.
Remove the input shaft rear bearing assembly (1) using
a hydraulic press.
Rem ...
Other materials:
Automatic Door Locks
The vehicle is programmed so that when the doors are closed, the ignition is
on, and the shift lever is moved out of P (Park) for automatic transmissions, or
when the vehicle speed is above 13 km/h (8 mph) for manual transmissions, the doors
and the trunk/liftgate will lock.
To unlock the doo ...
Overview (Radio with CD/USB)
91011121314151617
O /VOL (Power/Volume)
Turns the system on or off and adjusts the volume.
Z (Eject)
Removes a disc from the CD slot.
Buttons 1−6
Radio: Saves and selects favorite stations.
AUX Port
3.5 mm (1/8 in) connection for external devices.
...
Seat Belt System Description and Operation
Restraint System
Note: If the vehicle has been in a collision, refer to Repairs
and Inspections Required After a Collision.
The vehicle has front and rear seat belts that are the primary means of occupant
restraint. Seat belts help to keep the occupants inside the passenger ...
0.0093