|
Callout |
Component Name |
|---|---|
|
1 |
Instrument Panel Cluster Upper Bezel Procedures
Use a flat bladed plastic trim tool in order to disengage the retainers securing the instrument panel cluster upper bezel to the instrument cluster assembly. |
Front Floor Console Replacement
Instrument Panel Accessory Bezel Package InstallationRadio Programming and Setup
Note:
DO NOT program a control module unless directed to by a service procedure
or a service bulletin. If the ECU is not properly configured with the correct
calibration software, the ECU will not control all of the vehicle features
properly.
Ensure the programming tool is ...
Special Tools
Illustration
Tool Number/ Description
CH-161-B
DT-161-B
KM-161-B
J-22888-20A
Bearing Puller
CH-804
CH-49692
MKM-804
Tensioner
CH-39570
J-39570
...
Exhaust Manifold Installation
Clean the exhaust manifold sealing surface.
Install a NEW exhaust manifold gasket (1) to the cylinder head.
Caution: Refer to Fastener Caution.
Caution: Refer to Torque-to-Yield Fastener Caution.
Install the exhaust manifold (3) and tighten the NEW nu ...