|
Callout |
Component Name |
|---|---|
|
Preliminary Procedure
Remove the heater and air conditioning control. Refer to Heater and Air Conditioning Control Replacement. |
|
|
1 |
Instrument Cluster Display Switch Fastener (Qty:?€‰2) Caution: Refer to Fastener Caution. |
|
2 |
Inflatable Restraint Instrument Panel Module Indicator Procedure
Disconnect the electrical connector. |
Instrument Panel Accessory Upper Trim Plate Replacement
Instrument Panel Assembly ReplacementFront Compartment Fuse Block Replacement
Removal Procedure
Disconnect the battery negative cable. Refer to Battery Negative Cable
Disconnection and Connection.
Remove the junction block cover (1).
Remove the positive battery cable nut (1) from the junction block.
Remove the pos ...
Warm Up Three-Way Catalytic Converter Installation
Install the warm up three way catalytic converter (5) to the brackets and
the turbocharger. Use a NEW warm up three way catalytic converter seal (2).
Note: Never re-use the V-clamp.
Install a NEW warm up three way catalytic converter V-clamp (1).
In ...
Piston, Connecting Rod, and Bearing Removal
Install the crankshaft balancer bolt.
Set the pistons 1 and 4 to TDC in direction of engine rotation.
Note: Note cylinder sequence.
Mark the connecting rod with the connecting rod bearing cover (1).
Remove the 4 connecting rod bearing caps bol ...