Chevrolet Sonic Repair Manual: Instrument Panel Center Molding Replacement (With U58)

Chevrolet Sonic Repair Manual / Body / Body Interior / Center Console / Instrument Panel Center Molding Replacement (With U58)

Instrument Panel Center Molding Replacement
Callout	Component Name
1	Instrument Panel Center Molding Assembly Procedure Use a flat bladed plastic trim tool in the shown locations, then rotate the trim tool 90?° to release the top of the molding away from the instrument panel assembly. Grasp the molding with both hands, one on each side of the air outlets, and pull straight back, working from top to bottom. When replacing the center molding assembly, transfer all necessary components.

Instrument Panel Assembly Replacement

Instrument Panel Assembly Replacement Callout Component Name Preliminary Procedure Remove the right and left windshield side garnis ...

Instrument Panel Center Molding Replacement (Without U58)

Instrument Panel Center Molding Replacement Callout Component Name 1 Instrument Panel Center Molding Assembly Procedu ...

Other materials:

Tire Rotation and Required Services Every 12 000 km/ 7,500 mi
Rotate the tires, if recommended for the vehicle, and perform the following services. See Tire Rotation. Check engine oil level and oil life percentage. If needed, change engine oil and filter, and reset oil life system. See Engine Oil and Engine Oil Life System. Check engine coo ...

Roof Rail Front Assist Handle Replacement
Roof Rail Front Assist Handle Replacement Callout Component Name 1 Roof Rail Front Assist Handle Fastener (Qty:?€‰2) Caution: Refer to Fastener Caution. Procedure Fold the assist handle downward ...

Oil Level Indicator and Tube Removal
Remove the oil dipstick. Remove the oil level indicator tube bolt (1). Note: If the engine oil level is at the maximum level, oil may emerge while removing the oil dipstick guide tube. Remove the oil level indicator tube (2) and oil level indicator seal. ...

0.0124