Chevrolet Sonic Repair Manual: Instrument Panel Center Molding Replacement (Without U58)

Chevrolet Sonic Repair Manual / Body / Body Interior / Dashboard Assembly / Instrument Panel Center Molding Replacement (Without U58)

Instrument Panel Center Molding Replacement
Callout	Component Name
1	Instrument Panel Center Molding Assembly Procedure Use a flat bladed plastic trim tool in the shown locations, then rotate the trim tool 90?° to release the top of the molding away from the instrument panel assembly. Grasp the molding with both hands, one on each side of the air outlets, and pull straight back, working from top to bottom. When replacing the center molding assembly, transfer all necessary components.

Instrument Panel Center Molding Replacement (With U58)

Instrument Panel Center Molding Replacement Callout Component Name 1 Instrument Panel Center Molding Assembly Procedu ...

Instrument Panel Center Trim Panel Replacement

Instrument Panel Center Trim Panel Replacement Callout Component Name 1 Instrument Panel Center Trim Panel (Qty:?€‰2 ...

Other materials:

Strut and Shock Absorber Inspection
Note: The strut assembly DOES NOT have to be removed from the vehicle to perform the following inspection procedure. Note: A light film of oil on the top portion of the strut is normal. DO NOT replace the strut for this condition. Condition 1 Oil or fluid residue only o ...

Secondary Air Injection Check Valve Installation
Install a NEW secondary air injection check valve gasket (1). Install the secondary air injection check valve (2). Caution: Refer to Fastener Caution. Install the 3 secondary air injection check valve bolts (3) and tighten to 22 Y (16& ...

Transmission Fluid Pump Assemble (6T40/45/50)
Table 1: Fluid Pump w/Valve Trains Assemble Table 2: Torque Converter Fluid Seal and Fluid Filter Assembly Assemble Fluid Pump w/Valve Trains Assemble Fluid Pump w/Valve Trains Assemble Callout Comp ...

0.008