Callout |
Component Name |
---|---|
1 |
Instrument Panel Center Trim Panel (Qty:?€‰2) Procedure
Use a flat bladed plastic trim tool in order to disengage the retainers securing the center trim plates to the instrument panel accessory upper trim plates. |
Windshield Wiper and Washer Switch Replacement
Windshield Wiper and Washer Switch Replacement
Callout
Component Name
Preliminary Procedure
Remove the upper trim cover and the lower trim cover from the steering
column. Refer to Steering Column Lower Trim Cover Replacemen ...
Battery Positive and Negative Cable Replacement
Removal Procedure
Disconnect the negative battery cable. Refer to Battery Negative Cable
Disconnection and Connection.
Remove the fuse block and battery positive cable cover.
Remove the battery tray. Refer to Battery Tray Replacement.
Remove the battery posit ...
Input Shaft Assemble
Special Tools
J-840733 Driver
For equivalent regional tools, refer to Special Tools.
Note: Ensure the input shaft rear bearing retaining ring (2) is
placed on the input shaft before installing the input shaft rear bearing
assembly (1).
Place the input sh ...