|
Callout |
Component Name |
|---|---|
|
1 |
Instrument Panel Fuse Block Access Hole Cover Procedure
Grasp the lower edge of the fuse block cover and pull outward disengaging the retainers securing the fuse block cover to the instrument panel lower trim pad cover. |
Instrument Panel Compartment Replacement
Instrument Panel Fuse Block Access Hole Cover Replacement (Without AAL)Malfunction Indicator Lamp
A computer system called OBD II (On-Board Diagnostics-Second Generation) monitors
the operation of the vehicle to ensure emissions are at acceptable levels, helping
to maintain a clean environment. The malfunction indicator lamp comes on when the
vehicle is placed in ON/RUN, as a check to show ...
DIC Operation and Displays
The DIC has different displays which can be accessed by using the DIC buttons
on the turn signal lever on the left side of the steering wheel. The DIC displays
trip, fuel, and warning messages if a system problem is detected. See Trip Computer and Vehicle Messages.
DIC Buttons
1. SET/C ...
Fog Lamps (RS)
To replace the front fog lamp bulb:
1. Locate the fog lamp located under the front fascia.
2. Remove the cap from the back of the fog lamp assembly.
3. Disconnect the electrical connector from the fog lamp bulb assembly.
4. Remove the bulb by turning it counterclockwise and pulling it straight ...