|
Callout |
Component Name |
|---|---|
|
1 |
Instrument Panel Fuse Block Access Hole Cover Procedure
Grasp the lower edge of the fuse block cover and pull outward disengaging the retainers securing the fuse block cover to the instrument panel lower trim pad cover. |
Front Compartment Fuse Block Replacement
Instrument Panel Fuse Block Access Hole Cover Replacement (Without AAL)Fog Lamps (RS)
To replace the front fog lamp bulb:
1. Locate the fog lamp located under the front fascia.
2. Remove the cap from the back of the fog lamp assembly.
3. Disconnect the electrical connector from the fog lamp bulb assembly.
4. Remove the bulb by turning it counterclockwise and pulling it straight ...
Tread Wear Indicators Description
The original equipment tires have tread wear indicators that show when you should
replace the tires.
The location of these indicators are at 60 degree intervals around the outer
diameter of the tire. The indicators appear as a 6 mm (0.25 in) wide band when the
tire trea ...
Synchronizers Cleaning and Inspection
Note: When servicing the synchronizers, retain them in the order
that they are removed. Mark the parts to ensure the correct position for
inspection and assembly.
Clean all the synchronizer parts in a suitable cleaning
solvent and air dry all the parts.
Inspect the 1 ...