|
Callout |
Component Name |
|---|---|
Preliminary Procedures
|
|
|
1 |
Instrument Panel Insulator |
Instrument Panel Fuse Block Access Hole Cover Replacement (Without AAL)
Instrument Panel Lower Airbag Replacement - Driver SideBrake Pedal Position Sensor Calibration
Calibration Criteria
Note: Do not apply the brake pedal during the brake pedal position
sensor calibration procedure. Any movement of the brake pedal during this
procedure will cause the calibration procedure to fail. If this occurs,
the brake pedal position sensor calibrati ...
Tire-to-Wheel Match-Mounting (Vectoring)
Note: After remounting a tire to a wheel or after replacing a tire
and/or a wheel, remeasure the tire and wheel assembly runout in order to verify
that the amount of runout has been reduced and brought to within tolerances.
Ensure that the tire and wheel assembly is properly balanced ...
Transmission Control Replacement
Removal Procedure
Remove the floor console. Refer to
Front Floor Console Replacement.
Lift both cable adjustment retainers (1), one for
each cable, to release the shift lever and selector lever cable.
.1
Pull the shift lever and selector lever cable ret ...