Chevrolet Sonic manuals

Chevrolet Sonic Repair Manual: Instrument Panel Lower Airbag Replacement - Passenger Side

Chevrolet Sonic Repair Manual / Body / Restraints / Air Bag Modules / Instrument Panel Lower Airbag Replacement - Passenger Side



Instrument Panel Lower Airbag Replacement - Passenger Side

Callout

Component Name

Warning:

Refer to SIR Inflator Module Handling and Storage Warning.

Warning:

Refer to SIR Warning.

Preliminary Procedure

  1. Disable the SIR system. Refer to SIR Disabling and Enabling.
  2. Remove the instrument panel lower compartment. Refer to Instrument Panel Lower Compartment Replacement.

1

Instrument Panel Compartment Reinforcement Fastener (Qty:?€‰3)

Caution:

Refer to Fastener Caution.

2

Instrument Panel Lower Airbag Fastener (Qty:?€‰2)

Tighten


9?€‰Y?€‰(80?€‰lb?€‰in)

3

Inflatable Restraint Instrument Panel Lower Module Replacement ?€“ Passenger Side

Procedure

  1. Refer to Inflatable Restraint Module Handling and Scrapping.
  2. Enable the SIR system. Refer to SIR Disabling and Enabling.
Instrument Panel Lower Airbag Replacement - Driver Side
Instrument Panel Lower Airbag Replacement - Driver Side Callout Component Name Warning: Refer to SIR Inflator Module Handling ...

Rear Seat Outboard Seat Back Airbag Replacement
Rear Seat Outboard Seat Back Airbag Replacement Callout Component Name Warning: Following the deployment of a rear seat side a ...

Other materials:

Loss of Control
Skidding There are three types of skids that correspond to the vehicle's three control systems: Braking Skid — wheels are not rolling. Steering or Cornering Skid — too much speed or steering in a curve causes tires to slip and lose cornering force. Acceleration Skid — too muc ...

Liftgate Emblem/Nameplate Replacement (Hatchback)
Liftgate Emblem/Nameplate Replacement Callout Component Name 1 Liftgate Emblem/Nameplate Assembly Caution: Refer to Exterior Trim Emblem Removal Caution. Procedure The part and surface should be 2 ...

Piston, Connecting Rod, and Bearing Removal
Install the crankshaft balancer bolt. Set the pistons 1 and 4 to TDC in direction of engine rotation. Note: Note cylinder sequence. Mark the connecting rod with the connecting rod bearing cover (1). Remove the 4 connecting rod bearing caps bol ...

© 2014-2026 Copyright www.csmans.com
 
0.0144