|
Callout |
Component Name |
|---|---|
|
1 |
Instrument Panel Outer Trim Cover (Qty:?€‰2) Procedures
Use a flat bladed plastic trim tool in order to disengage the retainers securing the instrument panel outer trim covers to the instrument panel assembly. |
Instrument Panel Outer Air Outlet Replacement - Right Side
Instrument Panel StorageEmblem/Nameplate Replacement
Caution: Refer to Exterior Trim Emblem Removal Caution.
The part and vehicle surface should be 21?°C (70?°F) prior to installation.
The vehicle should remain inside in a temperature range of 21?°C (70?°F) for
1 hour after assembly to allow the adhesive to develop sufficient bo ...
Cooling System Draining and Filling
Draining Procedure
Warning: To avoid being burned, do not remove the radiator
cap or surge tank cap while the engine is hot. The cooling system will
release scalding fluid and steam under pressure if radiator cap or surge
tank cap is removed while the engine and radi ...
Fuel Pressure Relief
Special Tools
EN-34730-91 Pressure Tester
For equivalent regional tools, refer to Special Tools.
Warning: Gasoline or gasoline vapors are highly flammable. A fire
could occur if an ignition source is present. Never drain or store gasoline
or diesel fuel in an open container, due ...