Chevrolet Sonic manuals

Chevrolet Sonic Repair Manual: Instrument Panel Upper Trim Panel Replacement - Right Side

Chevrolet Sonic Repair Manual / Body / Body Interior / Dashboard Assembly / Instrument Panel Upper Trim Panel Replacement - Right Side



Instrument Panel Upper Trim Panel Replacement - Right Side

Callout

Component Name

Preliminary Procedure

  1. Disable the SIR system. Refer to SIR Disabling and Enabling.
  2. Remove the instrument panel center molding. Refer to Instrument Panel Center Molding Replacement.
  3. Remove the instrument panel center upper molding. Refer to Instrument Panel Center Upper Molding Replacement.
  4. Remove the instrument panel lower compartment. Refer to Instrument Panel Lower Compartment Replacement.
  5. Remove the right instrument panel accessory upper trim plate. Refer to Instrument Panel Accessory Upper Trim Plate Replacement.
  6. Remove the right instrument panel outer trim cover. Refer to Instrument Panel Outer Trim Cover Replacement.

1

Instrument Panel Inflatable Restraint Module Fasteners (Qty:?€‰2)

Caution:

Refer to Fastener Caution.

Tighten


10Y 89?€‰lb?€‰in

2

Instrument Panel Upper Trim Panel Fastener (Qty:?€‰3)

3

Instrument Panel Upper Trim Panel

Procedures

  1. Use a flat bladed plastic trim tool in order to disengage the retainers securing the upper trim panel to the instrument panel assembly.
  2. Disconnect the electrical connections.
  3. When replacing the instrument panel upper trim panel, transfer all necessary components.
Instrument Panel Upper Trim Panel Replacement - Left Side
Instrument Panel Upper Trim Panel Replacement - Left Side Callout Component Name Preliminary Procedure Remove the instrument cluste ...

Instrument Panel Knee Bolster Replacement
Instrument Panel Knee Bolster Replacement Callout Component Name Preliminary Procedures Disable the SIR system. Refer to SIR Disabl ...

Other materials:

Hood Ajar Indicator Description and Operation
Hood Ajar Switch The body control module (BCM) applies B+ to the hood ajar signal circuit and monitors the voltage to determine the position of the hood. When the hood is closed, the switch is open and voltage remains high. When the hood is open, the switch is closed and the voltag ...

Steering Linkage Inner Tie Rod Replacement
Steering Linkage Inner Tie Rod Replacement Callout Component Name Preliminary Procedures Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle. Remove the steering gear boot. Refer to Steering Gear Boot ...

Automatic Transmission Flex Plate Replacement
Automatic Transmission Flex Plate Replacement Callout Component Name Preliminary Procedure Remove the transmission. Refer to Transmission Replacement. Special Tools EN-470-B Angular Torque Wrench EN-49979 Crankshaf ...

© 2014-2022 Copyright www.csmans.com
 
0.0079