|
Callout |
Component Name |
|---|---|
|
Preliminary Procedure
Remove the left front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement. |
|
|
1 |
Intake Air Temperature and Pressure Sensor Fasteners (Qty 2) Caution: Refer to Fastener Caution. |
|
2 |
Intake Air Temperature and Pressure Sensor Procedure
Disconnect the electrical connector. |
Charge Air Bypass Regulator Solenoid Valve ReplacementAutomatic Transmission
P (Park): This position locks the front wheels. It is the best position to use
when you start the engine because the vehicle cannot move easily.
Warning
It is dangerous to get out of the vehicle if the shift lever is not fully
in P (Park) with the parking brake firmly set. The vehicle can ro ...
Liftgate Weatherstrip Replacement
Liftgate Weatherstrip Replacement
Callout
Component Name
1
Liftgate Weatherstrip
Procedure
Clean the area where the seal will be mounted. Use a suitable solvent
with a mixture of 50?€‰percent isopropyl alc ...
Crankshaft Front Oil Seal Installation
Special Tools
EN-6351 Mounting Sleeves
For equivalent regional tools, refer to Special Tools.
Clean the sealing surfaces.
Slide the EN-6351 sleeves (2) protective sleeve onto the crankshaft
journal.
Slide the crankshaft front oil seal (1) over the protective sleev ...