Chevrolet Sonic Repair Manual: Intake Manifold Disassemble (1.6L LDE)
- Remove the intake manifold absolute pressure sensor bolt.
- Remove the manifold absolute pressure sensor (1) from the intake manifold (2).
- Remove the intake manifold mount (2) from the intake manifold (1).
- Remove the throttle body seal (1).
- Remove the intake manifold seal (3) from the intake manifold (2).
- Remove the 2 evaporative emission canister purge solenoid valve bracket bolts (2).
- Remove the evaporative emission canister purge solenoid valve bracket (1) from the intake manifold (7).
- Remove the 2 multiport fuel injection fuel rail bolts (3).
- Remove the multiport fuel injection fuel rail (4) and the fuel injectors (5) from the intake manifold (7).
- Remove the 4 multiport fuel injector seals (6).
Intake Manifold Disassemble
Remove the fuel injection rail ground cable nut (1).
Remove the 2 fuel injection rail bolts (2).
Remove the fuel injection fuel rail assembly (3).
Remove the ...
Intake Manifold Disassemble (1.8L LUW and LWE)
Remove the intake manifold absolute pressure sensor bolt (1).
Remove the manifold absolute pressure sensor (2) from the intake manifold (3).
Remove the intake ...
Other materials:
Blizzard Conditions
Being stuck in snow can be a serious situation. Stay with the vehicle unless
there is help nearby. If possible, use Roadside Assistance. See Roadside Assistance
Program. To get help and keep everyone in the vehicle safe:
Turn on the hazard warning flashers.
Tie a red cloth to an outside mi ...
Outside Rearview Mirror Replacement (Power)
Outside Rearview Mirror Replacement
Callout
Component Name
Preliminary Procedures
Remove the front side door upper front trim panel. Refer to Front
Side Door Upper Front Trim Panel Replacement.
Remove the outside rearview ...
Exhaust Manifold Heat Shield Installation
Install the exhaust manifold heat shield (2).
Caution: Refer to Fastener Caution.
Install the 3 exhaust manifold heat shield bolts (1) and the washers and
tighten to 8 Y (71 lb in).
...
0.0063