Chevrolet Sonic Repair Manual: Intake Manifold Removal
- Remove the 6 intake manifold bolts (1).
- Remove the intake manifold (1) along with the intake manifold gasket.
Note:
Intake manifold bolts remain in intake manifold screw bores.
Intake Manifold Installation (1.8L LUW and LWE)
Clean the sealing surfaces.
Install 4 NEW gaskets.
Caution: Refer to Fastener Caution.
Install the intake manifold (2) and the 7 intake manifold bolts (1 ...
Intake Manifold Removal (1.6L LDE)
Remove the 7 intake manifold bolts (1).
Remove the intake manifold (2).
Remove the intake manifold gasket.
...
Other materials:
Safety System Check
Now and then, check that the safety belt reminder light, safety belts, buckles,
latch plates, retractors, and anchorages are all working properly. Look for any
other loose or damaged safety belt system parts that might keep a safety belt system
from doing its job. See your dealer to have it re ...
Roof Panel Joint Finish Molding Replacement
Roof Panel Joint Finish Molding Replacement
Callout
Component Name
Caution: Refer to Exterior Trim Emblem Removal Caution.
Preliminary Procedures
Begin at the rear edge of the roof panel joint finish molding an ...
Tire-to-Wheel Match-Mounting (Vectoring)
Note: After remounting a tire to a wheel or after replacing a tire
and/or a wheel, remeasure the tire and wheel assembly runout in order to verify
that the amount of runout has been reduced and brought to within tolerances.
Ensure that the tire and wheel assembly is properly balanced ...
0.0069