|
Callout |
Component Name |
|---|---|
|
Preliminary Procedure
Properly raise and support the vehicle. Refer to Lifting and Jacking the Vehicle. |
|
|
1 |
Intake Manifold Runner Control Valve Actuator Solenoid Valve Fastener (Qty: 3) Caution: Refer to Fastener Caution.
6 Y (53 lb in) |
|
2 |
Intake Manifold Runner Control Valve Actuator Solenoid Linkage |
|
3 |
Intake Manifold Runner Control Valve Actuator Solenoid Procedure
Disconnect the wiring harness electrical connector from the intake manifold runner control valve actuator solenoid. |
Intake Manifold Replacement (LUW)Hood Primary Latch Release Cable Replacement
iv
Hood Primary Latch Release Cable Replacement
Callout
Component Name
Preliminary Procedures
Remove the radiator opening upper cover. Refer to Front Opening
Upper Cover Replacement.
Remove the air inlet grille. Refer to A ...
Brake Drum Replacement (J93, J94)
Special Tools
CH-41013 Rotor Resurfacing Kit
CH-42450-A Wheel Hub Resurfacing Kit
For equivalent regional tools, refer to Special Tools.
Removal Procedure
Warning: Refer to Brake Dust Warning.
Release the park brake.
Raise and support the vehicle. Refer to Lif ...
Oil Pan Installation
Special Tools
EN-49980 Guidance Pins
For equivalent regional tools, refer to Special Tools.
Clean the sealing surfaces from old sealing material, dirt, oil and grease.
Note: The sealing bead should be applied close to the inner edge
of the oil pan. Take care that the oil suctio ...