Intake Manifold Tuning Valve Actuator Replacement
Air Cleaner Inlet Duct ReplacementAir Conditioning Compressor Oil Balancing
Draining Procedure
Note: Drain and measure as much of the refrigerant oil as
possible from the removed compressor.
Drain the oil from both the suction and discharge ports of the removed
compressor into a clean, graduated container. Rotate the compressor sha ...
Engine Block Disassemble
Remove the cylinder head locating (1, 2).
Remove the oil pressure switch (1).
Remove the knock sensor bolt (2) and the knock sensor (1).
Clean the thread.
Remove the oil flow check valve (1).
Remove the oil pressure rel ...
Turbocharger Oil Feed Pipe Replacement
Removal Procedure
Open the hood.
Disconnect battery negative cable. Refer to Battery Negative Cable Disconnection
and Connection.
Remove the exhaust manifold heat shield. Refer to Exhaust Manifold Heat
Shield Replacement.
Remove the turbocharger oil feed p ...