Chevrolet Sonic manuals

Chevrolet Sonic Owner's Manual: Interior Lighting

Dome Lamps

The dome lamp controls are in the headliner above the rear seats.


The dome lamp controls are in the headliner above the rear seats.

when a door is open. : Press to turn the lamps off, even
when a door is open.

the middle position, the lamps turn on automatically when a door is opened. : When the button is returned to
the middle position, the lamps turn on automatically when a door is opened.

Reading Lamps : Press to turn on the dome lamps.


Reading Lamps

For vehicles with front reading lamps, they are in the overhead console.


For vehicles with front reading lamps, they are in the overhead console.

: Press to turn each lamp on or off. or
For more information about interior lighting, see Instrument Panel Illumination : Press to turn each lamp on or off.


For more information about interior lighting, see Instrument Panel Illumination Control  or Courtesy Lamps.

Steering Wheel Adjustment
To adjust the steering wheel: 1. Pull the lever down. 2. Move the steering wheel up, down, forward, and backward. 3. Pull the lever up to lock the steering wheel in place. Do not adjust the stee ...

Exterior Lighting
The exterior lamp control is on the instrument panel to the outboard side of the steering column. O : Briefly turn to this position to turn the automatic light control off or on again. AUTO: T ...

Other materials:

Brake Pedal Position Sensor Replacement
Removal Procedure Remove the instrument panel lower trim pad cover. Refer to Instrument Panel Lower Trim Pad Cover Replacement. Disconnect the brake pedal position sensor electrical connector. Remove the brake pedal position sensor bolt (1). Remove t ...

Piston and Connecting Rod Disassemble
Remove the piston with connection rod. Refer to Piston, Connecting Rod, and Bearing Removal. Note: Note installation position of the piston in respect of the connection rod. Detach the piston from the connection rod. Note: Do not damage the bore. Remove ...

Knock Sensor System Description
Circuit/System Description The knock sensor system enables the engine control module (ECM) to control the ignition timing for the best possible performance while protecting the engine from potentially damaging levels of detonation. The ECM uses the knock sensor system to test for ...

В© 2014-2026 Copyright www.csmans.com
 
0.0064