Chevrolet Sonic manuals

Chevrolet Sonic Owner's Manual: Keys

Warning

Leaving children in a vehicle with a Remote Keyless Entry (RKE) transmitter is dangerous and children or others could be seriously injured or killed. They could operate the power windows or other controls or make the vehicle move. The windows will function with the RKE transmitter in the vehicle, and children or others could be caught in the path of a closing window. Do not leave children in a vehicle with an RKE transmitter.

The key that is part of the Remote Keyless Entry (RKE) transmitter can be used


The key that is part of the Remote Keyless Entry (RKE) transmitter can be used for the ignition and all locks.

Press the button on the RKE transmitter to extend the key. Press the button and


Press the button on the RKE transmitter to extend the key. Press the button and the key blade to retract the key.

See your dealer if a new key is needed.

If the vehicle has an ignition, and it becomes difficult to turn they key, inspect the key blade for debris.

If you are locked out of the vehicle, see Roadside Assistance Program.

Keys and Locks
...

Remote Keyless Entry (RKE) System
See Radio Frequency Statement. If there is a decrease in the RKE operating range: Check the distance. The transmitter may be too far from the vehicle. Check the location. Other vehicles or obje ...

Other materials:

When Should an Airbag Inflate?
This vehicle is equipped with airbags. See Airbag System. Airbags are designed to inflate if the impact exceeds the specific airbag system's deployment threshold. Deployment thresholds are used to predict how severe a crash is likely to be in time for the airbags to inflate and help restra ...

Communication Interface Module Battery Replacement
Communication Interface Module Battery Replacement Callout Component Name Preliminary Procedure Remove the instrument panel lower compartment. Refer to Instrument Panel Lower Compartment Replacement 1 ...

Instrument Panel Center Molding Replacement (With U58)
Instrument Panel Center Molding Replacement Callout Component Name 1 Instrument Panel Center Molding Assembly Procedure Use a flat bladed plastic trim tool in the shown locations, then rotate the trim tool 90 ...

В© 2014-2026 Copyright www.csmans.com
 
0.0075