Theft Deterrent Module Replacement
Door Lock and Ignition Lock Folding and Non-Folding Key CuttingFront Floor Console Bracket Replacement
Front Floor Console Bracket Replacement
Callout
Component Name
Preliminary Procedure
Remove the left front floor console extension panel. Refer to Front Floor
Console Extension Replacement - Left Side.
1
...
Tire and Wheel Balancing (Collet Cone Selection)
Important: Never use the hub cap bore to center the wheel onto
the balancer. The pilot bore (on the hub side of the wheel) is machined
to be concentric to very tight non - standard tolerances. The bottom cap
bore is not machined to this same degree of precision.
Accurate mac ...
Battery Positive Cable Replacement
Removal Procedure
Disconnect the negative battery cable. Refer to Battery Negative Cable
Disconnection and Connection.
Remove the underhood fuse block cover.
Remove the battery positive nut (1) and the battery positive cable (2),
from the underhood fus ...