KeysTPMS Sensor Matching Process
Each TPMS sensor has a unique identification code. The identification code needs
to be matched to a new tire/wheel position after rotating the tires or replacing
one or more of the TPMS sensors. The TPMS sensor matching process should also be
performed after replacing a spare tire with a road ...
Data Link Communications Description and Operation
Note: This is an overview of different serial data buses used by GM
devices to communicate with each others. Use Data Communication Schematics to
find out which serial data buses are configured for a specific vehicle.
Circuit Description
There are many components in a vehicle t ...
Camshaft Replacement
Special Tools
EN-422 Installer
For equivalent regional tools, refer to Special Tools.
Removal Procedure
Note: Take extreme care to prevent any scratches, nicks or
damage to the camshafts and caps bearing surfaces.
Remove the timing belt rear cover ( ...