Select Language, then select from the available language(s).
Vehicle Factory Settings
Text ScrollFog Lamp Aiming
Preparation Procedure
Note: Horizontal aim is not adjustable on this vehicle. Vertical
aim is done by an adjusting nut located on the rear of the fog lamp. Prior
to aiming the fog lamps, perform the following steps:
Completely assemble all of the components on the vehi ...
Secondary Air Injection Pump Installation
Install the secondary air injection pump (1).
Loosely install the secondary air injection pump nut (2) and the 2 secondary
air injection pump bolts (4).
Caution: Refer to Fastener Caution.
Tighten the secondary air injection pump nut (2) an ...
Crankshaft Front Oil Seal Replacement
Special Tools
EN-960 Installer
EN-45000 Remover Oil seal
For equivalent regional tools, refer to Special Tools.
Removal Procedure
Remove the crankshaft balancer. Refer to Crankshaft Balancer Replacement.
Place a drain pan underneath the front crankshaft seal area.
...