Chevrolet Sonic Repair Manual: Lift Plate and Holding Fixture Installation
|
Callout |
Component Name |
|---|---|
|
1 |
DT-47811-A Transmission Lift Plate Warning: Handle with care, the transmission assembly weighs over 83 Kg (183 lbs). Bodily injury could occur if not handled properly. Caution: Refer to Fastener Caution. Procedure
Tighten bolts and nut. Tighten
12 Y (106 lb in) Special Tools
DT-47811-A Transmission Lift Plate For equivalent regional tools, refer to Special Tools. |
|
2 |
DT-46625 Transmission Holding Fixture Procedure
13 Y (10 lb ft) Special Tools
DT-46625-10 Holding Fixture Adapter For equivalent regional tools, refer to Special Tools. |
Internal Components Removal
Internal Components Removal
Callout
Component Name
1
1??? Clutch Backing Plate Retainer Ring
Warning: The retain ...
Lift Plate and Holding Fixture Removal
Lift Plate and Holding Fixture Removal
Callout
Component Name
1
DT-46625 Transmission Holding Fixture
For equivalent ...
Other materials:
Vehicle Personalization
Personalization Menu (Radio without Touchscreen)
Use the audio system controls to access the personalization menus for customizing
vehicle features.
The following are all possible personalization features. Depending on the
vehicle, some may not be available.
CONFIG (Configur ...
Air Cleaner Element Replacement
Removal Procedure
Disconnect mass air flow sensor wiring harness plug (2) from mass air
flow sensor (3).
Unclip mass air flow sensor wiring harness retainer clip from air cleaner
housing (1).
Remove the air cleaner outlet duct clamp̴ ...
Main Shaft Disassemble (Gen 1)
Table 1:
1st Gear Removal
Table 2:
1st Gear Blocking Rings Removal
Table 3:
1st and 2nd Gear Synchronizer Hub Retaining Ring
Removal
Table 4:
1st and 2nd Gear Synchronizer Hub and 2nd Gear
Removal
Table 5:
2nd Gear Bearing Remova ...
0.0075